Vacmaster® 15T Tier 4 Diesel Abrasive Vacuums
Vacmaster® 15T Tier 4 Diesel Abrasive Vacuums are a trailer mounted vacuum designed to convey granulated
materials from a work area to a container for recycling or disposal. Using a powerful 174 HP Perkins Tier 4 Final diesel
engine to drive the rotary lobe blower, the Vacmaster® 15T Tier 4 Diesel Abrasive Vacuums easily create 27" Hg of
suction to quickly move large quantities of material from inside tanks, ship hulls, and containment areas, reducing
clean up time on work sites. The large hopper with automatic direct dump gate can be raised and lowered to match
the height of your disposal container. Vacmaster® 15T Tier 4 Diesel Abrasive Vacuums can easily clean up surface
preparation work sites of spent abrasives like garnet, coal slag, cooper slag, crushed glass, steel shot, steel grit, and
Heavy-duty Leveling Jacks
The Vacmaster® 15T Tier 4 Diesel Abrasive Vacuum has four heavy-duty leveling jacks to precisely level the unit during set-up.
The on-board blower produces up to 2,367 cubic feet per minute of air, generating 27" Hg of suction power.
Pull-action Latch Clamps
Pull-Action Latch Clamps come as standard equipment to secure the lid to the hopper during use. the Pull-Action Latch clamps do not require tools to disengage reducing the time to change out the filters.
The Vacmaster® 15T Tier 4 Diesel Abrasive Vacuum includes two hose guides to keep the vacuum hose outside of the hopper supports, preventing the hose from being crushed.
174 HP Diesel Engine By Perkins®
Perkins® engines have a proven history of reliability, ease of maintenance, and are supported by a vast network of service centers.
Electronic Engine Control
The electronic engine control adjusts engine speed and monitors the engine’s performance, including oil pressure, RPM, engine temperature, and voltage. The control interface and digital display make operation and monitoring simple.
Manual Twin Plate PTO Clutch
The Power-Take-Off (PTO) clutch transfers power from the Perkins® engine to the blower. The manual engagement system provides proven performance and reliability, reducing downtime compared to complex hydraulic systems.
On-board Air Compressor
The on-board compressor produces 13 CFM of air, powering the pulser system to remove collected dust and debris from the filters.
Side-mounted Vacuum Hose
A 6" I.D. vacuum hose is mounted on the outside of the hopper supports for easy replacement and to help prevent damage while raising and lowering the hopper.
Automatic Dump Gate
The automatic dump gate automatically opens to empty the hopper during use to keep you moving. The duration of time between openings can be adjusted for material and flow.
Pneumatic Piston Vibrators
Hopper-mounted pneumatic piston vibrators move collected dust and debris from hopper walls down to the dump gate for discharge. By minimizing the amount of dust and debris collected on the hopper walls, cleaning and maintenance time is reduced.
Vacmaster® Filter Bags
The Vacmaster® 15T Tier 4 Diesel Abrasive Vacuum includes 37 acrylic-coated filter bags to collect and trap airborne dust and debris.
Hopper Lid Lift
A heavy-duty lift is mounted on the side of the hopper to assist with raising and lowering the hopper lid and eliminates the need for a secondary lifting device.
Operator Control Pendant
The operator control pendant is designed to allow the operator to stand back from the unit for better visibility while raising and lowering the hopper.