Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot
The Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot is a pressure vessel used as part of an abrasive blasting system to deliver a mixture of abrasive and compressed air to a work surface. Marco blast pots are proudly engineered and manufactured in the USA and built in accordance with ASME guidelines. Each Marco blast pot is designed with added features to enhance work site safety. Blastmaster® Abrasive Blasting Pots are manufactured using higher quality materials that resist wear, reducing costly downtime and increasing production rates. Typical applications include blast rooms, blast yards, bridges, oil refineries, shipyards and storage tanks. Common abrasives used include garnet, mineral abrasives, slags and steel grit/shot.

SIMPLIFIED MAINTENANCE

The Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot has a bolted, 4” flanged clean-out port at the bottom of the vessel, providing quick and easy access for cleaning out abrasive.

ENHANCED SAFETY

The patent pending Blastmaster® Camlock Closure Lockout Device deters access to the camlocks when the abrasive blasting pot is pressurized. This safety device comes standard on all Blastmaster® 120 Cu. Ft. Abrasive Blasting Pots.

INCREASED PRODUCTION

The 120 Cu. Ft. vessel can be filled with abrasive from bulk bags, pneumatic tanker, or a storage hopper, reducing the time to fill the vessel with abrasive. The 120 cubic foot capacity vessel, rated at 150 PSI and using 1-1/2” I.D. pusher lines, allows up to four operators to blast at higher pressures for an extended period of time.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Extra Thick Shell)
The 1/2” thick steel vessel is built in accordance with ASME Pressure Vessel Code to a working pressure of 150 PSI. The extra thick shell allows for longer life of the pressure vessel.
Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Lower Overall Height)
The Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot has a lower overall height than other similar capacity units, allowing for ease of transport and work site flexibility.
Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Camlock Closure Lockout Device)
The Blastmaster® Camlock Closure Lockout Device restricts access to the camlock closure when the blast pot is pressurized.
Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Union-End Ball Valves)
Union-End Ball Valves allow the operator to stop abrasive flow to a metering valve for performing maintenance.

Key Features

1/2” thick vessel wall
18” shorter height than 160 Cu. Ft. Pot
Blastmaster® Pneumatic Closure Lockout Device
Union-end ball valves
1-1/2” Blastmaster® Maxum III Abrasive Metering Valve
Individual Blastmaster® 130 Remote Control Systems
Electric control mounting bracket
4” flange clean-out port

Optional Accessories

Blastmaster® Heavy-Duty Bulk Bag Rack

Blastmaster® Heavy-Duty Bulk Bag Rack

Blastmaster® Heavy-Duty Bulk Bag Rack features gusset reinforced legs, tapered sides, four lifting lugs, fork-pockets, and a swing gate for moving around the work site.

Abrasive Screen and Funnel

Abrasive Screen & Funnel (Bulk Pot)

Abrasive Screen and Funnel prevents large particles and debris from entering or spilling over the abrasive blasting pot.

Ladder Extensions

Ladder Extensions

Pivoting ladder extensions can be stowed in the “up” position during transport to prevent being damaged.

Blastmaster® Automated Depressurization System

Blastmaster® Automated Depressurization System

Blastmaster® Automated Depressurization System enables pressurization and depressurization of the blast pot, easily reachable from the ground.

Literature

Technical Information

Videos

ZV1P50EtRSA
Blastmaster® Bulk Abrasive Blasting Pots Overview Video
Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Offset Lifting Lugs)

Offset Lifting Lugs

The offset position of the four overhead lifting lugs improve balance when lifting and easier access to the camlock closure.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Blastmaster® Maxum III Abrasive Metering Valve)

Blastmaster® Maxum III Abrasive Metering Valve

The Blastmaster® Maxum III Abrasive Metering Valve screw-type design delivers superior metering, providing a precise air and abrasive mixture for maximizing production.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (5-Bolt Camlock Closure)

5-Bolt Camlock Closure

The 5-bolt camlock closure is easier to maintain than models with internal working parts, such as a pop-up valve or an air-actuated valve, because of less wear and tear on the components.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Individual Blastmaster® 130 Remote Control Systems)

Individual Blastmaster® 130 Remote Control Systems

Individual Blastmaster® 130 Remote Control Systems allow the operator to identify the source of a problem and perform maintenance on a single outlet.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Blastmaster® 1.5 inch High-Flow GateKeeper Air Valve)

Blastmaster® 1-1/2” High-Flow GateKeeper Air Valve

The Blastmaster® 1-1/2” High-Flow GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (1600 CFM Moisture Separator with Control Box Mounting Bracket)

1600 CFM Moisture Separator with Control Box Mounting Bracket

The 1600 CFM moisture separator has a superior control box mounting bracket, providing a solid base for the control box.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Oversized Moisture Separator Mounting Bracket)

Oversized Moisture Separator Mounting Bracket

The oversized bracket fully supports the weight of the moisture separator, substantially reducing the possibility of damage to the pipe string, vessel, or moisture separator during transportation.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Dual Bolt-On Ladders)

Dual Bolt-On Ladders

Dual bolt-on ladders with square rungs can be easily removed and replaced if damaged. The square rungs offer superior traction over commonly used round rungs.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Bulk Bag Rack Collars)

Bulk Bag Rack Collars

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot come standard with bulk bag rack collars for installation of a bulk bag rack.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (4 inch Flanged Clean-Out Port)

4” Flanged Clean-Out Port

The 4” flanged clean-out port at the bottom of the vessel can be quickly and easily unbolted, reducing time spent cleaning out abrasive.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Abrasive Blasting Pot Muffler)

Abrasive Blasting Pot Muffler

The Abrasive Blasting Pot Muffler reduces the noise generated during the depressurization process of an abrasive blasting pot.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Four Oversized Tie-Down Lugs)

Four Oversized Tie-Down Lugs

Tie-down chains and straps can be easily fed through the four 3” tie-down lugs, providing a solid leverage point for securing the abrasive blasting pot for transportation.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Radial-Ply Tires)

Radial-Ply Tires

The premium Goodyear® LT215/75R17.5 (10-ply construction) tires are specifically designed for trailer applications for improved handling on highways and an extended life.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Electric Brakes)

Electric Brakes

The highway trailer comes standard with electric brakes that have 26,000 in-lbs. of brake torque output.

Mounting Platforms

(160 Cu. Ft. Shown)
Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Highway Trailer)

Highway Trailer

The highway trailer includes electric brakes, fenders, and a DOT approved light package.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Yard Trailer)

Yard Trailer

The yard trailer is ideal for applications where mobility around the work site is required.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Fork-Pocket Skid)

Fork-Pocket Skid

The fork-pocket skid allows for ease of movement around a work site while using a mechanical lifting device.

Blastmaster® 120 Cu. Ft. Abrasive Blasting Pot (Stationary Legs)

Stationary Legs

The 20” stationary legs are ideal when the abrasive blasting pot will be in the same location for an extended period of time.

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us