Blastmaster® 1.0 Cu. Ft. C-Series Abrasive Blasting Pots
An abrasive blasting pot is a pressure vessel used to contain a supply of abrasive material during the abrasive blasting process. Used as part of an abrasive blasting system, the abrasive blasting pot delivers a mixture of abrasive and compressed air to the blast nozzle for surface preparation. The Blastmaster® 1.0 Cu. Ft. C-Series Abrasive Blasting Pot has a dual “Fail-to-Safe”, pressure-release remote control system, with independent inlet and outlet valves that close when the remote control switch is deactivated. Typical applications include concrete preparation, swimming pool refurbishing, farm implement maintenance, construction equipment maintenance, light touch-up work, and areas that are difficult to access. Common abrasives used include aluminum oxide, crushed glass, garnet, glass bead, mineral abrasives, and slags.


The Blastmaster® 120 Remote Control System allows the operator to remotely activate and deactivate the abrasive blasting pot from the nozzle, eliminating the need for a pot tender.


OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.


A heavy-duty handle and 10” semi-pneumatic tires allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.

Blastmaster 1.0 Cu. Ft. Abrasive Blasting Pot - 120 Remote Control System Close-Up
The Blastmaster® 120 Remote Control System is a dual “Fail-to-Safe” configuration including a 1/2” inlet valve, 1/2” diaphragm outlet valve, remote control line, and a remote control switch.
The Blastmaster® 1.0 Cu.Ft. C-Series Abrasive Blasting Pot steep angle, 90° cone bottom provides significantly improved abrasive flow versus a 60° dished cone.
The Blastmaster® Regulator Jr. Abrasive Metering Valve allows the operator to set and maintain a consistent flow of abrasive, reducing abrasive consumption and increasing production rates at the nozzle.

Key Features

1.0 Cubic Foot Capacity
Abrasive Blasting Pot Muffler
Galvanized pipe fittings
10” semi-pneumatic tires
Empty weight 120 lbs
Overall height 37”
Fill height 37”
Width 24”
Depth 25”

Optional Accessories

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separators remove excess moisture, oil, and other debris from compressed air before entering the abrasive blasting pot.

Blastmaster® Air Hose

Blastmaster® Air Hose (Red)

Blastmaster® Air Hose conveys compressed air to your abrasive blasting pot and pneumatic tools.

Abrasive Screen, Heavy-Duty Lid & Umbrella

Abrasive Screen, Heavy-Duty Lid & Umbrella

The abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.



Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Dust Collectors
Engineered Systems
Service,Repair & Modernization
fax: 563.324.6258