Blastmaster® 1.0 Cu. Ft. Abrasive Blasting Pot
The Blastmaster® 1.0 Cu. Ft. Abrasive Blasting Pot is a pressure vessel used as part of an abrasive blasting system to deliver a mixture of abrasive and compressed air to a work surface. Marco blast pots are proudly engineered and manufactured in the USA and built in accordance with ASME guidelines. Each Marco blast pot is designed with added features to enhance work site safety. Blastmaster® Abrasive Blasting Pots are manufactured using higher quality materials that resist wear, reducing costly downtime and increasing production rates. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, railcar shops, storage tanks, and water towers. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, slags, and steel shot & grit.

REDUCED COST

The pneumatic remote control system allows the operator to remotely activate and deactivate the abrasive blasting pot from the nozzle, eliminating the need for a pot tender.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

PORTABILITY

A heavy-duty handle and 10” semi-pneumatic tires allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.

Blastmaster® 1.0 Cu. Ft. Abrasive Blasting Pot Highlights (152P Remote Control System)
The remote control system includes a Blastmaster® 1” GateKeeper Air Valve, a Blastmaster® 1” Diaphragm Outlet Valve, Blastmaster® 152P Remote Control Switch, and 55 feet of remote control line.
Blastmaster® 1.0 Cu. Ft. Abrasive Blasting Pot Highlights (90 Degree Cone Bottom)
The Blastmaster® 1.0 Cu.Ft. Abrasive Blasting Pot steep angle, 90° cone bottom provides significantly improved abrasive flow versus a 60° dished cone.
Blastmaster® 1.0 Cu. Ft. Abrasive Blasting Pot Highlights (Bantam Metering Valve)
The screw-type design of the Blastmaster® Bantam Abrasive Metering Valve delivers superior metering, providing a precise air and abrasive mixture for maximizing production.

Key Features

1.0 Cubic Foot Capacity
Abrasive Blasting Pot Muffler
Galvanized pipe fittings
10” semi-pneumatic tires
Empty weight 120 lbs
Overall height 37”
Fill height 37”
Width 24”
Depth 25”

Optional Accessories

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separators remove excess moisture, oil, and other debris from compressed air before entering the abrasive blasting pot.

Blastmaster® Air Hose

Blastmaster® Air Hose (Red)

Blastmaster® Air Hose conveys compressed air to your abrasive blasting pot and pneumatic tools.

Abrasive Screen, Heavy-Duty Lid & Umbrella

Abrasive Screen, Heavy-Duty Lid & Umbrella

The abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us