Abrasive blasting pots are the right equipment for large to small scale industrial and contractor abrasive blasting projects. Abrasive blasting pots are available in a wide range of capacities and can allow up to four operators at a time to perform abrasive blasting for an extended period of time.

*Choose a system configuration below to narrow your options ...or... use the table at the bottom of the page.

  • System Type

  • Metering Valve

*This configuration is not available. All available configurations are listed below.

Blast Pot Product Line Table

Pressure-Hold Systems Size / Series RC
System
Outlet
Qty.
+ Maxum 3 Metering Valve 160 Cu.Ft. 130 2-4
120 Cu.Ft. 130 2-4
60 Cu.Ft. 130 2-4
20 Cu.Ft. 130 1-2
10 Cu.Ft. 130 1-2
6.5 Cu.Ft. HP-Series 130 1
3.5 Cu.Ft. HP-Series 130 1
+ Automatic Easy-Flow Metering Valve 6.5 Cu.Ft. E-Series 130 1
3.0 Cu.Ft. E-Series 130 1
Hose-End Shutoff Systems Size / Series RC
System
Outlet
Qty.
+ Bantam Metering Valve 2.0 Cu.Ft. L-Series 153 1
+ 2-Hole Jr. Metering Valve 1.5 Cu.Ft. L-Series 153 1
0.35 Cu.Ft. L-Series 125 1
Non-Pressurized System 0.20 Suction Blaster 1600 Gun 1
Pressure-Release Systems
+ Independent Inlet/Outlet Valves
Size / Series RC
System
Outlet
Qty.
+ Bantam Metering Valve 6.5 Cu.Ft. M-Series 125 1
3.5 Cu.Ft. M-Series 125 1
1.0 Cu.Ft. 68 1
+ Manual Easy-Flow Metering Valve 6.5 Cu.Ft. E-Series 125 1
3.0 Cu.Ft. E-Series 125 1
+ Regulator Metering Valve 6.0 Cu.Ft. C-Series 125 1
3.0 Cu.Ft. C-Series 125 1
Pressure-Release Systems
+ Tandem Air Valve
Size / Series RC
System
Outlet
Qty.
+ Bantam Metering Valve 10 Cu.Ft. 123 1
6.5 Cu.Ft. S-Series 123 1
3.5 Cu.Ft. S-Series 123 1

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.